节能2（Energy saving 2）.docVIP

节能2（Energy saving 2） 1 storage system design Full load storage + part load storage Full load storage: cold load peak power all moved to trough. Part load storage: all day long the required cooling capacity provided by cold storage device. 2 cold storage equipment Coil type ice storage device (external melt ice) Package type cold storage device Ice slide type ice storage device S-s-c-i device 3 operation mode of cold water storage system Cold storage freezer condition cooling cold storage pool cooling Refrigerator and cold storage pool and cooling conditions 4 air conditioning design of ice storage system 1) determine the typical design day cooling load 2) choose the form of ice storage device 3) determine the form and operation strategy of storage system 4) to determine the cold storage and cold storage capacity of host device 5) choose other ancillary equipment 6) preparation of cold storage cycle when running chart (7) economic analysis by means of calculation, equipment costs, operating costs for the investment recovery period is compared with the conventional refrigeration system) To determine the 5 device capacity (Ideas - give full play to the role of refrigeration, running day and night, in order to achieve the minimum installed capacity of chiller) The best balance formula for: QC=Q/ (N1+Cf*N2) Q=eqc based air conditioning refrigerating capacity: N1 day air conditioning operating hours (0.8-0.9 n) Qs=n2*cf*qc N2 night ice condition chiller coefficient (H cF 0.65 screw centrifugal piston 0.70) 6 examples because the air conditioning system is not running at night, so I do not set the record of the chiller From the table: eQi=8046RTH hours n=16, because only 11 hours of air conditioning load exceeds the peak hour load 50% hours So the day of refrigeration in air conditioning conditions with operating hours n2=8 using screw chiller, chiller coefficient cf=0.7 Air conditioning refrigeration chiller Qc=8046/ (13.6+0.7*8) = 420RT The ice storage capacity of Qs=8*0