进入系统设置程序（Enter system settings）.docVIP

进入系统设置程序（Enter system settings） Enter system settings Press the power button on the front panel of the system to turn on the system. If the system is open, turn off the system and open it again. Press the F2 key immediately when the Dell logo is displayed on the screen. If you wait too long for the operating system to start loading memory, let the system complete the load process; then turn off the system and try again. Note: to ensure that the system is closed in turn, consult the documentation attached to the operating system. In addition, you can also access the system setup program by responding to some error messages. For instructions, see responding to error messages. Responding to error messages If the screen screen displays error messages during system boot, please write it down. Refer to system beep code and system information in the installation and troubleshooting guide for information about the information, explain and correct the wrong suggestions, and then enter the system setup program. There is one exception: when you install the memory upgrade, it is normal for the system to display error messages during the first boot. In this case, you do not need to refer to system beep code and system information, but refer to the memory upgrade statement described in the installation and troubleshooting guide. If the system prompts F1 to continue, or press F2 to run the system setup program, press the F2 key. Using the system setup program Table 3-1 lists the keys used to view or change information on the system settings program screen and exit the setup program. Table 3-1: system settings program location key Key Effect Left and right arrow keys Scroll through the five main menu screens Enter Select menu options Up and down arrow keys Scroll through the menu item or option in the field Esc Quit the system setup program without saving changes F9 Restore default values for all system settings program fields F10 Save the changes and exit the system setup program