钢筋连接套筒钢管生产要注意的几点（How many points should be paid attention to in the production of steel pipe with connecting sleeve）.doc

钢筋连接套筒钢管生产要注意的几点（How many points should be paid attention to in the production of steel pipe with connecting sleeve） How many points should we pay attention to when connecting steel tube with steel sleeve? We discuss the mechanical properties of the steel (cars, milling, planing, milling, welding) and physical properties (tensile strength, yield point and section shrinkage), first proposed several factors that affect the quality of steel, and then according to the analysis of the production process; 1) chemical composition (including carbon content: C%, P%, S%) 2) impurities (nonmetallic) 3) the internal structure of the steel (the degree of austenitizing, grain size, density of bubbles and bubbles in the subsurface, and the density of the tissue). 4) surface crack. The above four factors always go through the smelting and heating process of the whole steel. The first two points are in the smelting process. The content of P and S in the chemical composition is an important index in carbon steel. P content is too high, can cause cold brittleness of steel. S content is too high will cause hot brittleness. Therefore, for steel, the main component of the chemical is its carbon content is up to standard. The second is whether the P and S components are within the standard range. 2. An impurity is a nonmetallic substance. It does not react with iron, nor does it react with oxygen or other substances to produce gas. It exists between grains, and affects the bonding force between grain and grain. Under the action of external force, the impurities containing grains and grains are destroyed first. Firstly, the billet is usually smelted by scrap steel. This is because the impurities in the scrap are less than those of the iron ore.. Equivalent to two smelting. The rust and grease on the surface of the steel scrap can be easily disposed of. The domestic general take oxygen converter smelting. On the one hand can improve the temperature on the other hand can also be non metal ga