STLD40DPUR;STLD40DPMR;中文规格书,Datasheet资料.pdf

STLD40D White LED power supply for large display backlight Features ■ Inductor switches boost controller ■ PFM mode control ■ High efficiency over wide range of input voltage from 3.0 V to 5.5 V ■ Over voltage protection with automatic restart ■ Adjustable peak current limit QFN8 (3 x 3 mm) ■ Enable pin with possibility of PWM dimming control ■ Low shutdown current 1 µA resistor RLED. The device can be turned ON/OFF ■ Small external component through the logic enable signal pin EN. By ■ Good load and line regulation applying a low frequency PWM signal the LEDs ■ QFN8 3 x 3 mm can be dimmed. The maximum peak inductor current can be programmed by connected a resistor RSET to the pin RSET. Applications ■ White LED supply for LCD backlight ■ Mobile phone ■ PDA and organizers ■ Any handsets powered form 3.0 V to 5.5 V Description STLD40D is a boost converter that operates from 3.0 V to 5.5 V. It can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switch that can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSW is fixed internally and a