文件小窍门（File tips）.doc

文件小窍门（File tips） Show hidden file processing methods: At the command prompt window (CMD), switching to the U disk drive, and then enter the attrib /s /d -s -h. Note: attrib commands to modify properties of files or folders. /s represents the match file in the current folder and its subfolders. /d also handles folders. -s stands for system properties for removing files or folders. -h stands for removing hidden properties of files or folders. Folder can not be deleted processing DEL /F /A /Q \%1 \ \? RD /S /Q \%1 \ \? Copy the above code into Notepad and save it Then rename the 1.bat file Then drag the deleted files to the 1.bat mouse and let go In the absence of access to the Internet, the two computers send files to each other. As long as 2 machines have network cards First, the cable should be correct The two machines are connected directly, using crossed lines or called twisted wires The two computers are connected via a HUB, a switch or a router Parallel lines or straight lines must be used Two. Add share Control panel - network connections - local connections - properties Add file and printer sharing for the Microsoft network Three. Settings sharing Only the shared drive, directory and file to see each other Four. Setting IP IP address is 192.168.0.? The subnet mask is The gateway is ? There are two different sets Five. After the completion of the direct: Start - run, enter each other, IP You can see the shared drive, directory and file. Just insert two crystal heads into the two computers network card. For example, the E disk on the computer under the file to the , the E can be set to 1.4 computer disk sharing (right click to share disk, click on the sharing and security, select the share this folder, click OK ), open my computer on a computer, input in the address bar: \\, enter, you can see the file sharing also on the computer, then you can copy the files on the 1.4E disk, in 1.5 computer paste. Sharing ADSL: with two computers as gateways Hardware conne