对存在装配关系零件尺寸公差带调整的建议（Suggestions for adjusting the tolerance of the parts in the assembly relation）.docVIP

对存在装配关系零件尺寸公差带调整的建议（Suggestions for adjusting the tolerance of the parts in the assembly relation） Suggestions for adjusting the tolerance of the parts in the assembly relation 9-9 Just open up the mechanical design manual limits and fits section, you will find: whether or shaft hole based system , the priority commonly used fit (GB / T1801 - 1999) in the clearance column, with tolerance code are recommended to have the same H7 / H6, H8 / H7, H9 / H8, H11 / hll,... Accuracy class. In the actual application process, engaged in machinery manufacturing enterprises according to their own equipment conditions, flexible selection of machining precision mechanical parts assembly, the reasonable cost to meet the market requirements of mechanical equipment manufacturing, machining precision parts and easy to guarantee that the product quality is in control of the Corporation, as long as the parts the size, precision, can be interchanged whenever and wherever possible components, convenient maintenance of machinery and equipment, has brought great convenience and benefits to all industries. Any promotion of advanced science and technology has its best scope of application, or has the necessary application conditions, the above tolerance and coordination level is no exception. The best conditions used are: the large number of machine parts manufacturing, the automatic control of the production line, or the large number of processing parts, but the human factors have little influence on the process. If manufacturing occasions in small and medium enterprises in single or small batch processing, precision parts mainly ensured by human factors, if fully applied the matching precision, the tolerance level of the scientific and advanced nature is not only difficult to reflect, but also bring unnecessary trouble. Suppose that a shaft with a diameter of 200 and a length of L is required in a mechanical structure. It needs to be loaded into a hole of 200 mm 50 depth, and its assembly a