建筑变形规程（Building deformation code）.docVIP

建筑变形规程（Building deformation code） The classification and accuracy requirements of building deformation measurement are determined according to the following analysis: 1 grade classification of settlement measurement and its precision requirement 1) grade division. It adopts special, one or two and three grades, and represents four grades of precision, such as special high precision, high precision, medium precision and low precision. Here is a list of premium is specified in the former Soviet Union reference standard; grade precision grade is specified in the reference of German standards; level of accuracy is in accordance with the phase measurement accuracy index level and close to national standards in China, and sums up the current standards of the domestic settlement provisions to determine the level of accuracy. See Table 1 for the requirements of the standards. Grade name, take level and the other, the main consideration to the settlement observation leveling with country, city, there are a number of different engineering leveling, using a different name distinction will help to maintain integrity of their respective series. The difference is: the former level is not mainly reflected between the measurement precision grade, grade as the latter provisions , advanced control level function; the former is high precision measurement of small range, in order to adapt to the various construction projects, in the network, line length, line number, observation precision analysis and so on are the large area, leveling a relatively large area of different etc.. The collection of domestic and international relevant standards set for the classification and the target degree requirements are listed in table 1; 2) grade accuracy index. Taking the middle error of observation station elevation difference as the grade accuracy index, it is easy to take into account to adapt to small range measurement. For measuring the length of the general number of hundreds of meters, the t