北方地区低温条件下扭王字块的预制.pdfVIP

2008年2月 由国灌湾建设 Feb．，2008 第1期 总第153期 China Harbour Engineering Total 153．No．1 北方地区低温条件下扭王字块的预制 李松斌，陈盛兜 (中交四航局第二工程有限公司，广东 广州 510300) 摘 要：低温条件下扭王字坟预制的质量较常温下更加难以保证，松顶、气泡多和裂缝多等质量 “常发病”经常 困扰着工程技术人员。文章介绍了辽宁红沿河核电厂护岸工程低温条件下预制扭王字块的施工过程和持续改进的 施工方法等，并对气泡、裂缝等质量问题产生的原因作了分析总结，重点提出了在北方地区低温条件下扭王字块 预制的主要工艺和质量控制要点及改进措施，供类似项目参考。 关键词：扭王字块；低温；气泡；裂缝；质量控制措施 中图分类号：TU528．52 文献标识码：A 文章编号：1003—3688(2OO8)01—0052—04 Prefabrication of Twisted Multi—Leg Blocks at Low Temperatures in Northern Regions IA Song—bin，CHEN Sheng—dou (No．2 Eng．Co．Ltd．of CCCC Fourth Harbour Engineering Co．Ltd．，Guangzhou 510300，China) Abstract：It is more difficult tO control the quality of the prefabrication of twisted multi—leg blocks at low tempera— tures than at normal temperatures and the“frequently encountered quality problems”like loose top．bubbles and cracks in the blocks often put the engineering personnel in a difficult position．This paper presents the process of prefabrication of twisted multi—·leg blocks at low temperatures and the construction methods being incessantly im—· proved for the construction of the revetments for Hongyanhe Nuclear Power Plant in Liaoning Province．A summa— ry and analysis of the causes of the quality problems like bubbles and cracks is given．The major technological pro— cess，key points in quality control and measures for improvement for the prefabrication of twisted multi—leg blocks at low temperatures in northern regions are emphatically proposed for the reference of similar projects． Key words：twisted multi—leg block；low temperature；bubble；cracking；measure for quality control 1 工程概况 万 m