cad笔记（CAD notes）.docVIP

cad笔记（CAD notes） 1, toolbar From the toolbar Directly in the existing toolbar right click to choose Toolbar: drawing, modify, characteristics, layer, annotation 2, adjust the cursor Tools / options / display / cross cursor size / choice / pick box size 3, select the - click to choose - box From left to right (blue) contains all objects From right to left (green) as long as the object can be met 4, cancel ESC Delete the delete delete the selected object Undo ctrl+z Redo ctrl+y 5, roller Scroll zoom object Hold to drag the object of translation Double click to all objects displayed on the screen *6, command bar All the local command According to the operation command bar prompts Beginners command bar operation *7, orthogonal F8 The horizontal and vertical button, open only after drawing in horizontal and vertical direction Object capture F3 Right click to find special object capture, switch selection settings point Object tracking F11 The scale effect, for the horizontal and vertical scale, and slowly pulled out of the cursor on the point, the dotted line scale can appear 8, determine the key Enter the right key space 9, line L The specified starting point out the direction of the input length and click OK Relative coordinates With the specified input coordinates (X, Y) starting point line point determination Note: the coordinates are coordinates relative to the starting point of the -- -- -- -- -- -- --- A straight line, L 1, the angle of judgment Zero position is in the horizontal line on the right side of the starting point The angle is rotated counterclockwise clockwise out, negative 2, the angle of input method The specified starting point out direction after the input length shift+ angle values. * at the end are named after the click again to determine the key words is to repeat the last command Two, construct line XL 1, pay attention to The command bar or or before the current command, can operate directly Or after the command is extended command, right click t