blue phosphorescent organic light-emitting devices with the emissive layer of mcpfcnir(pic)蓝色磷光有机发光器件发射层mcpfcnir(图片).pdfVIP

Hindawi Publishing Corporation Advances in Materials Science and Engineering Volume 2012, Article ID 192731, 5 pages doi:10.1155/2012/192731 Research Article Blue Phosphorescent Organic Light-Emitting Devices with the Emissive Layer of mCP:FCNIr(pic) Ji Geun Jang and Hyun Jin Ji Department of Electronics Engineering, Dankook University, San 29, Anseo-dong, Cheonan, Chungnam 330-714, Republic of Korea Correspondence should be addressed to Ji Geun Jang, semicgk@dankook.ac.kr Received 15 February 2012; Accepted 17 April 2012 Academic Editor: Etienne Baranoff Copyright © 2012 J. G. Jang and H. J. Ji. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. ˚ New high-efficiency blue-light-emitting phosphorescent devices with 300 A-thick emissive layer of N,N -dicarbazolyl-3,5- benzene [mCP] doped with 10 vol.% bis[(3,5-difluoro-4-cyanophenyl)pyridine]iridium picolinate [FCNIr(pic)] were fabricated with the different treatments of hole and electron transport layers. In the experiments, a single layer of 1,1-bis-(di-4- polyaminophenyl)cyclohexane [TAPC] and a double layer of N,N -di(1-naphthyl)-N,N -diphenylbenzidine [NPB] and mCP were ˚ used as hole transport layers (HTLs). In addition, 500 A-thick double layers of tris-[3-(3-p