南天PRPRE安装驱动步骤.doc

打印机驱动安装步骤如下： 驱动电脑系统自带的。1.任务栏开始菜单=》2.设置=》3.打印机和传真=》4.添加打印机=》5.把自动检测并安装即插即用打印机前面的√去掉，点下一步6.选择端口是LPT1(如果是转接头USB转接头把端口改成USB即可)，7点下一步，左边出现厂商拉到最下面点四通，右边打印机点Oki5530SC就可以了. 下面是安装本打印机的详细步骤： 首先打开控制面板、找到并打开“打印机和传真机” 进入“打印机和传真机”后点击左边导航栏“添加打印机” 此时会弹出“欢迎使用打印机添加向导”直接“下一步” 将自动检测打印机的勾选取消掉、并“下一步” 选择端口、默认为LPT1的并接口、若是请直接“下一步” 如果使用的是并口转USB的转换器请选择USB端口设备“下一步” 选择打印机厂商 选择打印机型号 键入打印机名称、可以不修改、若此打印机为经常使用请将其设置为默认 是否打印测试页、选择“是”请确认打印机处于待命状态、否则选“否” 到此本打印机驱动程序的安装已经完成、单击“完成” of vision. 3, build, fitting in with the urban master plan in Yibin city rapid rail transit long term network, as well as the vision of Yibin city, and future development of rail transit network. 4, Yibin city, preliminary rail traffic levels service levels, system model, and technical standards. 5, to ensure that network can be implemented. 6, stable conditions for planning and supporting of Yibin city track traffic construction and formation of rail transit industry, provide conditions for the start-up and development of rail transit in Yibin city. 1.7 technical course technology is the projects research program and research ideas. Technology reflects the various stages in the process, logical relations between various levels, research, techniques and phases. Network planning process the whole process can be divided into four parts, namely, background research, network architecture research, planning and implementation of research and programming interfaces. Figure 1.7-1 Yibin city rail transit network planning technology roadmap planning interface is mainly responsible for network planning interface with follow-up planning tasks. Network planning Urban planning system in a transitional position, online network planning is completed, will be carried out as soon as possible the following planning projects: 1, detailed control of the land of rapid rail transit network planning; 2, the partitioning for network planning; 3, joint planning of rail transport and urban transport in other ways; Detailed technical courses see be