slip compensation in efficiency-optimized three-phase induction motor drive systems滑移补偿efficiency-optimized三相感应电动机驱动系统.pdf

Intelligent Control and Automation, 2011, 2, 95-99 doi:10.4236/ica.2011.22011 Published Online May 2011 (http://www.SciRP.org/journal/ica) Slip Compensation in Efficiency-Optimized Three-Phase Induction Motor Drive Systems Hussein Sarhan, Rateb Issa, Mohammad Alia, Jamal M. Assbeihat Faculty of Engineering Technology, Department of Mechatronics Engineering, Al-Balqa ’ Applied University, Amman, Jordan E-mail : sarhan_52@, ratebissa@, makalalia2000@, assbeihat@ Received March 21, 2011; revised April 2, 2011; accepted April 5, 2011 Abstract Energy efficiency optimization techniques of electrical drive systems improve the overall efficiency and re- duce the hardness of mechanical characteristics of the drive system. It is therefore important to reduce the slip of induction motor to maintain its stable operation at different frequencies and loads. In this paper a slip compensator, based on fuzzy logic incremental controller has been developed to improve the steady state performance of efficiency-optimized three-phase induction motor drive system. The slip control is accom- plished through a fuzzy controller with 9 rules, taking speed error and speed error variation as inputs, to produce the frequency. The proposed controller reduces the slip occurring at low frequencies and light loads to certain value, and also reduces the energy efficiency of the system. Keywords: Induction Motor, Efficiency Optimization, Slip Compensation, Fuzzy Logic Controller 1. Introduction to a certain value to insure stable operation of the drive system at low frequencies [4]. Induction motors are the most used in industry