家具油漆工艺流程（Furniture painting process）.docVIP

家具油漆工艺流程（Furniture painting process） Furniture painting process 1. main construction process (1) varnish construction technology: burnish grassroots (clean wood surface, sandpapering, polished polished, clean with a damp cloth); brush varnish (diluted liquid film, drying); blow again (sandpaper putty, Putty Repair nail holes and cracks); brush second varnish, fine sandpaper polished; brush third varnish and polished wood; at least 5 times water sandpaper back light, waxing, polishing. Note: interval, dry through. 6 hours in summer, 24 hours in winter. Keep the scene clean and free of dust. The temperature is above 5 degrees centigrade. (2) mixed color paint construction technology: burnish grassroots (cleaning dust, surface repair base, with matte paper draw); first full Guanizi (reconcile putty, light oil, gypsum and fly water 3:6:1), polishing - priming paint curing agent (Main:: diluent 1:0.5:1, primer thickness is 1 cm, dry 4 hours), fine sandpaper, brushing paint (paint: curing agent: 1:0.5:1 diluent, curing agent to increase the adhesion of paint thinner, increase the dry, too thick inconvenient construction, too thin and poor adhesion), after filling Putty Repair, polished clean third times finish paint brushing second times to finish third times, finishing coat, polishing wax. The construction of standardized 2. construction points of edible vegetable oil brushing grinding base is an important process in application of varnish, should first clean the surface of the wood dust, oil and other impurities. An important process maxshare oil powder varnish populations, the construction of a cotton silk dipped in oil powder coated on the surface of the wood, rubbed his hand back and forth, will wipe oil powder into the wood to observe the eye. Besmear brushs oil, hand youshua to relaxed, fingers gently, to move not loose, brush prevail. When brushing, according to dip more often, each time dipped in oil, the operation frequently, brush along the requirements, accord