ospf路由器完全邻接关系的建立详细过程（The complete process of establishing the complete adjacency relation of OSPF routers）.docVIP

下载本文档

6
0
约7.89千字
约 6页
2017-08-31 发布于河南
举报
版权申诉

ospf路由器完全邻接关系的建立详细过程（The complete process of establishing the complete adjacency relation of OSPF routers）.doc

1、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

ospf路由器完全邻接关系的建立详细过程（The complete process of establishing the complete adjacency relation of OSPF routers）

ospf路由器完全邻接关系的建立详细过程（The complete process of establishing the complete adjacency relation of OSPF routers） The complete process of establishing the complete adjacency relation of OSPF routers Abstract: routers running OSPF protocols, if you want to function properly, have to establish a fully contiguous relationship with other routers. Because of this state, the LSDB of all routers in the same area is completely synchronous and consistent. Ha ha, and, in fact, should, in turn, OSPF routers complete the fully contiguous state when the LSDB of all routers in the same area is fully synchronized and consistent! Tags: OSPF router adjacency relationship The router that runs the OSPF protocol, if you want to function properly, has to establish a fully contiguous relationship with other routers. Because of this state, the LSDB of all routers in the same area is completely synchronous and consistent. Ha ha, and, in fact, should, in turn, OSPF routers complete the fully contiguous state when the LSDB of all routers in the same area is fully synchronized and consistent! There are so many processes: OSPF is in the down state, Init state, a bi - (two - way) - a state adjacency state (exstart) - a pre start state, a switch (exchange) -- a complete adjacency state (full)! When the router that configured the OSPF has just started, the protocol is still in the down state, and why? Because there are no other routers to exchange information with him. So what hes going to do next is to send the HELLO packets out through all the OSPF interfaces, and the target address of the packet is 224.0.0.5, which router does the address represent? I know. He represents the routers that are directly connected to the router that sends the HELLO packet, which is the direct connected router. And its important to note here that the HELLO packet is not routed, and that the HELLO packet has only one hop. How do we interpret the HELLO packets extending across multiple routers in the whole area? Extended be