螺旋瓦楞横切机振动分析-包装工程.pdfVIP

第38 卷 第3 期 包 装 工 程 2017 年2 月 PACKAGING ENGINEERING ·89 · 螺旋瓦楞横切机振动分析 王时畅，杜群贵 （华南理工大学，广州 510640 ） 摘要：目的 分析螺旋瓦楞横切机剪裁瓦楞纸板产生的机械振动，并通过减振减小上、下刀轴振动响应， 使其达到生产所需剪裁精度要求。方法 对螺旋瓦楞横切机进行了动力学建模，通过数学解析和 Ansys 仿真软件分别进行振动分析。结果 将解析结果与 Ansys 仿真结果进行对比，分析得到所建立的振动模 型是正确的，通过分析横切机系统振动特性参数，提出降低振动响应方法，即采用碳纤维材料使上、下 刀轴振动响应控制在0.07 mm 范围内，使其达到横切机剪裁精度要求。结论 建立的动力学数学解析模 型和Ansys 仿真对研究横切机振动特性，降低振动响应，改善横切机剪裁质量是有效的。 关键词：螺旋瓦楞横切机；振动分析；特性参数；振动响应；剪裁精度 中图分类号：TB486 文献标识码：A 文章编号： 1001-3563(2017)03-0089-06 Vibration of Spiral Corrugated Flying Shear Machine WANG Shi-chang, DU Qun-gui (South China University of Technology, Guangzhou 510640, China) ABSTRACT:The work aims to analyze the mechanical vibration generated when the spiral corrugated flying shear ma- chine is cutting corrugated board and to reach the cutting precision necessary for production by reducing the vibration re- sponse of upper and lower cutter shafts. The dynamics model of spiral corrugated flying shear machine was established. Vibration analysis was carried out by means of mathematical analysis and Ansys simulation software. By comparing the analytical results with the Ansys simulation results, they proved that the vibration model established was correct. Based on the analysis of vibration characteristic parameters of flying shear machine, the method used to reduce the vibration re- sponse was proposed, namely carbon fiber material was used to control the vibration response of upper and lower cutter shafts within 0.07 mm, so as to reach the cutting precision requirements of flying shear machine. All the above have proved that it