电阻数值判定法（Resistance numerical method）.docVIP

电阻数值判定法（Resistance numerical method） Resistance value identification: because the resistance value representation has the digital representation and the color ring representation two kinds, therefore the resistance value reading also has two kinds: A digital representation: this notation is often used in CHIP components. Before identification, the number two is the valid digit, while the third digit is the magnification. For example: 334 means: 33 * 104, =330, K, Omega 275 means: 27 * 105, =2.7, M, Omega B. color ring representation: The first and second color: black brown red orange yellow green blue purple gray Code: 89 Third ring: 10610710810910-1, 10-2 Fourth Ring: Gold: soil 5% silver: soil 10% (a) above is the color ring of the Fourth Ring resistor and represents the corresponding number, wherein the first and the second ring are valid numbers, the third ring is the magnification, and the fourth ring is the error. (b). Methods: first, second, third effective resistance ring numbers, fourth multiples, the five error (in color), such as: red brown brown brown resistance is 212 * 101 Omega Omega + 1% =2.12 K Reciprocal calculation of 7. resistance digital representation and color ring representation: A 7.6 K + 5% with color: purple blue and gold ring. B 7.61 K + 1% color ring is expressed as: purple, blue, brown, brown, brown. C 820, K, Omega with four rings and five rings (four ring error is gold, five ring error is brown): four rings: gray, red, gold; five rings: gray, red, black, orange, brown In recognition of four color ring resistors, two cases should be paid special attention: 1, when the third is black, the black represents the number of 0, some 0? Is the 0 0, that is, no 0. Such as: Red 2 Red 2 black 0 0 gold + 5% resistance is: 22 and not 220! 2, gold and silver will also appear in the third: we have already mentioned, the fourth is the color ring error, said different accuracy respectively with gold and silver color; and t