AD5422,21 程序.docVIP

/*-----------------------ADI AD5422/AD5412 Driver Reference Design Source Code----------------------------------- Author: 西安济通电气 Date: 2011-9-1 Rev: 1.0 Description: Realize AD5412/22 Driver，Use stc51 as MCU，Development Tool: KEIL C ---------------------------------------------------------------------------------------------------------*/ #include reg51.h #define SET_CLEAR() P1 = (P1 | 0x40) //P1.6-CLEAR #define CLR_CLEAR() P1 = (P1 0xbf) #define SET_LATCH() P1 = (P1 | 0x10) //P1.4-LATCH #define CLR_LATCH() P1 = (P1 0xef) #define SET_SCL() P1 = (P1 | 0x04) //P1.2-SCLK #define CLR_SCL() P1 = (P1 0xfb) #define SET_SDO() P1 = (P1 | 0x08) //P1.3-SDIN #define CLR_SDO() P1 = (P1 0xf7) sbit DOUT=P1^5; unsigned char buf[4] = {0,0,0,0}; void delay (int length) { while (length 0) length--; } void send_char_com(unsigned char ch) { SBUF=ch; while(!TI); TI=0; } void WriteToAD5422(unsigned char count,unsigned char *buf) { unsigned char ValueToWrite = 0; unsigned char i = 0; unsigned char j = 0; SET_LATCH(); CLR_LATCH(); delay(5); for ( i=count;i0;i-- ) { ValueToWrite = *(buf+i-1); for (j=0; j8; j++) { CLR_SCL(); delay(5); if(0x80 == (ValueToWrite 0x80)) { SET_SDO(); //Send one to SDIN pin of AD5422 } else { CLR_SDO(); //Send zero to SDIN pin of AD5422 } delay(5); SET_SCL(); ValueToWrite = 1; //Rotate data } } CLR_SCL(); delay(5); SET_LATCH(); delay(20); } void ReadFromAD5422(unsigned char count,unsigned char *buf) { unsigned char i = 0; unsigned char j = 0; unsigned int iTemp = 0; unsigned char RotateData = 0; CLR_LATCH(); delay(5); for(j=count; j0; j--) { for(i=0; i8; i++) { CLR_SCL(); RotateData = 1; //Rotate data delay(5); CLR_SDO(); //Write a nop condition when read the data. delay(5); iTemp = DOUT; //Read SDO of AD5422 SET_SCL(); if(iTemp) { RotateData |= 1; } } *(buf+j-1)= R