塔吊安装方案（Installation scheme of tower crane）.docVIP

塔吊安装方案（Installation scheme of tower crane） I. General Situation of the project A group a building project is located in a certain way No. 741 hospital, the construction area of 15799m2, the main part of the A zone 18, B zone 11, from the ground maximum height of 63.65 meters, the building external dimensions of 77.92m * 22.85m. Two, construction site conditions On the north side of a building project as a road, on the west side of a road, a residential area south of A for building 30#, B, on the south side attached to the floor of a hospital, on the eastern side of the underground garage, the building after the completion of this project is to build on the eastern side, the only material available site. Three. Tower crane modeling and location determination 1, according to the site conditions and the special circumstances of the project, the project uses a QTZ5313 attached tower crane, without attachment, independent height of 40 meters, arm length 53m. 2, the center position of tower crane is selected in the North facade of 21 axis -25 axis between the A area, away from the Q axis is 5.175 meters north of 100 meters long what channel can meet the installation and dismantling of the tower crane, and the installation height of 40 meters in the independent (from natural floor), can also avoid the attached building, residential building of the hospital safe height and north of the high voltage circuit safe height, can meet the needs of the construction materials. 3, tower cap excavation depth of 4 meters (3.24 meters away from the natural floor), platform plate thickness of 1.7 meters, the cap periphery size 8.15m * 10.25m, C30 strength and structure for the two time, the tower crane attachment, the first attachment surface located in the bottom 30 meters, adhesion and shear wall building Q axis and 25 and 1/Q axis and 21 axis, second is located on the surface of the tower attached to 54 meters, and the attached shear wall in A main building area 21 and 25 axis, constr