基于PLC钕铁硼氢气粉碎工艺控制系统设计.pdfVIP

2017 年 软 件 2017, Vol. 38, No. 3 第 38 卷 第 3 期 COMPUTER ENGINEERING SOFTWARE 国际 IT 传媒品牌 基于PLC 钕铁硼氢气粉碎工艺控制系统设计 孙方刚，纪志坚 (青岛大学 自动化与电气工程学院，山东 青岛 266071) 摘 要: 氢粉碎工艺是生产高磁性钕铁硼永磁材料的重要手段。为优化钕铁硼氢粉碎的控制过程，本文提出了 通过对钕铁硼合金吸氢饱和度值的判断，主要是对反应炉的温度和压力在不同的过程进行控制，设计了基于 PLC 钕铁硼氢粉碎的过程控制系统。运用西门子S7-200PLC 实现对钕铁硼氢粉碎过程中对反应炉的温度和压力的控制， 通过电动调节阀和固态继电器具体地控制压力和温度，比较理想的实现了钕铁硼氢粉碎。 关键词: 钕铁硼；氢粉碎；S7-200PLC ；固态继电器 中图分类号: TP273+ .5 文献标识码: A DOI ：10.3969/j.issn.1003-6970.2017.03.024 本文著录格式：孙方刚，纪志坚. 基于PLC 钕铁硼氢气粉碎工艺控制系统设计[J]. 软件，2017 ，38 （3）：118121 NdFeB Hydrogen Pulverization Process Control System Design Based on PLC SUN Fang-gang, JI Zhi-jian (College of Automation and Electrical Engineering, Qingdao University, Qingdao 26607l, China) 【Abstract 】: The hydrogen pulverization process is one of the essential means of preparing high-performance NdFeB magnet material. In order further to optimize the control process of NdFeB hydrogen this paper designs a control system of NdFeB hydrogen smash, based on PLC, by the judgement of NdFeB alloy absorption saturation of hydrogen and the control of the temperature and pressure of the process reaction. By using S7-200PLC, it can achieve the control of the temperature and pressure of the reacting furnace of process of NdFeB hydrogen pulveriza- tion, which are fulfilled specificly by the motorized valve and solid-state relays(SSR). It completes the hydrogen pulverization process in a way. 【Key words 】: NdFeB; Hydrogen pulverization; S7-200PLC; SSR 0 引言 S7-200 对反应炉[7]温度，压力等数据的采集，上位 机起到监控的作用，通过在编写梯形图程序实现整 随着现代高新技术产业的