jit与kanban（与看板JIT）.docVIP

jit与kanban（与看板JIT） JIT and KANBAN In the implementation of the most important JIT in the production management tools (Kanban), Kanban Kanban is used to control the production scheduling tools. Specifically, it is a card, card products in the form of different enterprises have different. The board information usually includes: part number, product name, production number, container form, container capacity, Kanban number, location and appearance of parts such as transfer. The 1. function of Kanban The JIT production, Kanban functions as follows: (1) the production and delivery of the work instructions Kanban record production, time, method, order and delivery quantity, delivery time, destination, places, transport and other information from the assembly process of successive step back, in the assembly line will be used with Kanban parts removed, in order to receive before the process. Process after receiving and JIT is realized through the kanban. (2) to prevent excessive production and excessive transport Kanban must be in accordance with the established rules of use to use. One rule is: no Kanban can not be produced, also can not be delivered. According to this rule, to reduce the number of Kanban, is also a corresponding reduction in production. The Kanban permitsat necessary amount, so by using Kanban can do automatically prevent the excessive production and proper delivery. (3) visual management tools Another rule is: use of Kanban Kanban must be kept in the loop, before the process of production in accordance with the Kanban remove order. According to this rule, the management personnel on-site job priority on production can be clear, easy to manage. Through the Kanban can know the procedures after the operation progress, inventory and so on. (4) improvement tools In the JIT production, to reduce WIP intermediate by reducing the number of Kanban storage time. In general, if the inventory is high, even if the equipment failure, the increase in the number of defe