利用mfc绘图（Drawing using MFC）.docVIP

利用mfc绘图（Drawing using MFC） First of all we said through the movement of the mouse to draw a straight line. Here to capture two mouse message: WM_LBUTTONDOWN, WM_LBUTTONUP. The starting point for WM_LBUTTONDOWN linear response message record, in response to the WM_LBUTTONUP message record straight end point and draw a straight line. Well, we look at how to respond. Void CDrawView:: OnLButtonDown (UINT nFlags, CPoint point) { //MessageBox (Left Button Clicks DrawView); M_ptOrigin = point; / / here we define a variable to hold the starting point of the internal line CView:: OnLButtonDown (nFlags, point); } Look at the following response to the WM_LBUTTONUP message record straight end point and draw a straight line. / / method Void CDrawView:: OnLButtonUp (UINT nFlags, CPoint point) { HDC hdc; HDC: = GetDC (m_hWnd); / / global function call MoveToEx (HDC, m_ptOrigin.x, m_ptOrigin.y, 0); LineTo (HDC, point.x, point.y); :: ReleaseDC (m_hWnd, HDC); CView:: OnLButtonUp (nFlags, point); } Two / / method Void CDrawView:: OnLButtonUp (UINT nFlags, CPoint point) { CDC = GetDC (*pDC); PDC-MoveTo (m_ptOrigin); PDC-LineTo (point); ReleaseDC (pDC); } Three / / method Void CDrawView:: OnLButtonUp (UINT nFlags, CPoint point) { CClientDC DC (this); when the //CClientDC object structure is called GetDC, call the destruction time ReleaseDC can only access the client area CClientDC DC ((GetParent)); Dc.MoveTo (m_ptOrigin); Dc.LineTo (point); } Four / / method Void CDrawView:: OnLButtonUp (UINT nFlags, CPoint point) { CWindowDC DC (this); //CWindowDC can access the client area and non client area Dc.MoveTo (m_ptOrigin); Dc.LineTo (point); } Void CDrawView:: OnLButtonUp (UINT nFlags, CPoint point) { CWindowDC DC (GetDesktopWindow ()); / / now can access the desktop Dc.MoveTo (m_ptOrigin); Dc.LineTo (point); } Continuous wire drawing: Ideas: the mouse signal is captured, and then at any time in response to the signal, drawing line. Here to set up a BOOL variable m_bDraw to determine whether