回转支承内齿轮加脂机 - 回转支承(转盘轴承)加脂机（Slewing bearing internal gear greasing machine slewing bearing (slewing bearing) greasing machine）.docVIP

回转支承内齿轮加脂机 - 回转支承(转盘轴承)加脂机（Slewing bearing internal gear greasing machine slewing bearing (slewing bearing) greasing machine） Slewing bearing internal gear greasing machine slewing bearing (slewing bearing) greasing machine Slewing bearing (bearing) and grease machine suitable for ship crane slewing bearing (bearing) | port machinery (slewing bearing) | reclaimer slewing bearing (bearing) | mining machinery (slewing bearing slewing bearing slewing bearing) | metallurgical machinery (to Pan Zhoucheng) | mining machinery (slewing bearing turntable bearing rotary bearings) filling etc. Slewing bearing grease filling machine, controlled by PLC, with touch screen, can display grease filling amount and preset grease filling amount. Fast, fat effect is good. For filling excavator slewing bearing, turbine bearing products such as oil. Main technical parameters and performance: 1) fat coating speed; greater than 5L/ rpm 2) rotational speed; 1~3 to /min 3) filling position: as with the vehicle position digging machine slewing bearing grease ester 4) grease machine adopts PLC control, touch screen display related filling content. 5) the equipment has manual and automatic functions 6) grease machine can preset grease filling quantity, quantitative control grease filling. 7) grease machine is equipped with automatic sound and light alarm device, grease filling finished alarm prompt. 8) the grease coating machine can display and control each state parameter in real time. And manual / automatic two grease switching mode, manual state is mainly used for equipment debugging, maintenance. 9) the grease injection system is equipped with a flow regulating valve, which can control the filling speed of the grease. The oil pipe joint on the grease head adopts high voltage universal rotary joint, which can avoid the pipeline distortion. 10) tanker has a perfect query function, can check the amount of filling before and filling times, filling data can be submitted to the management of the e