ta7698故障（Ta7698 fault）.docVIP

ta7698故障（Ta7698 fault） TA7698 fault phenomenon Fault phenomenon, fault location R.G.B a color, emphasis on 20~22 pin corresponding resistance, R522.R521.R523 resistance becomes larger colour is not synchronous, 32 feet C601 capacity drops; 36 outside the foot circuit capacitance is bad Color instability in 12 feet C504 color filter capacitor leakage color picking, noise, color 6 feet thick weak external ACC filter capacitor C503 failure Color crawl 17 feet, through the chrominance signal input, the external capacitor leakage, so that U, V signals can not be completely separated 8 foot comb filter, chrominance through signal adjustment potentiometer R505, bad or incorrect adjustment color distortion 10 pin, connected color sync pulse tuning, Zhou Buliang color distortion; crawl 19 feet external capacitor (0.01) leakage, so that 19 feet voltage drop, 7698 work in NTSC state color distortion, crawling, shutter out interference 38 flyback pulse input coupling capacitor C733 failure 38 out flyback pulse input clamp tube ZD705 breakdown chrominance delay line DL501 is not good color sometimes no 38 pin circuit resistance change, make input line reverse pulse smaller 4.43MHZ crystal oscillator is not good color sometimes no, and line 40 feet of video signal, reverse phase output capacitor, C602 leakage (some machines do not have this capacitor) Color phase dislocation TA7698 bad when the program appears, the color delay occurs when the APC filter capacitor in the 16,18 pin, C552, C553 is not good 6 feet ACC filter in the R504 open circuit APC filter balancing adjustment potentiometer R564 in 16~18 image left and no color, brightness is low, 38 feet no line reverse pulse input The upper 12 feet without color image color filter capacitor C504 failure image left drawing interference, color sometimes without 2 feet 12V filter capacitor C504 invalid image left colorless, right normal 6 feet, ACC filter capacitor C503 open circuit; 36 foot resistor R601 chan