框架高剪压比中层中节点抗震性能试验研究.PDF

第28卷 第1期 重庆 建筑 大学学报 V0l_28 No．1 2006年2月 Journal of Chongqing Jianzhu University Feb．2006 框架高剪压比中间层中节点抗震性能试验研究 傅剑平 ， 朱爱萍2， 陈，J、英 ， 白绍良 (1．重庆大学 土木工程学院，重庆 400045；2．巾国建筑科学研究院 结构所，北京 100013) 摘要：完成了5个接近足尺的不同轴压比的高剪压比钢筋混凝土框架中间层中节点平面粱柱组合体的 低周交变加载试验，弥补了国内外抗震节点试验在剪压比高参数区试验数据的不足。通过较全面测试 和分析粱筋在节点中的粘结及滑移规律、节点水平箍筋各肢的受力规律以及组合体的滞回耗能及刚度 变化规律，进一步揭示了这类节点的剪力传递机构特征、损伤发育特征及其综合抗震性能，为完善设计 规范和在框架非弹性动力反应分析中建立更合理的分析模型和滞回模型提供 了依据。 关键词：钢筋混凝土；抗震性能；梁柱节点；剪压比；轴压比 中图分类号：TU317．1 文献标识码：A 文章编号：1006—7329(2006)01—0040—07 Experimental Research on the Seismic Behavior of the Interior Joint with High Shear——Compression Ratios in the Frame FU Jian—ping ，ZHU Ai—ping ，CHEN Xiao—ying ，BAI Shao—liang (1．College of Civil Engineering，Chongqing University，Chongqing 400045，P．R．China；2．China Academy of Building Research．Beijing 100013，P．R．China) Abstract：The reversed cyclic loading tests of 5 nearly full—scale beam—column assembly specimens with high shear— compression ratio under different axialloads in reinforced concrete plane frames have been completed．which cover the shortage in the field of high shear—compression parameter among seismic joint experiments in the world．Based on rela． tively complete measuring and analyses of the law for the bond and slip of the beam bar through the joint，the stress of the level stirrup legs and hysteretic dissipated energy and the change of rigidity，the characteristic of shear transfer mech． anisms and damage development and comprehensive seismic behavior of the assembly are proposed in this paper．It makes it possible to improve design codes and to establish relatively reasonable analytic modes and hysteretic modes in inelastic dynamic response analyses of the frame． Keywords：reinforced concrete；seismic behavior；beam—column joint；shear—compression ratio；axial