阿法拉阀换热器介绍 中文.ppt

Detta ?r ett test! PHE Knowledge板式换热器 Topics to cover 目录 PHE main components and function 板式换热器主要组成部分和功能 Plates 板片 Gaskets 胶垫 Frames 框架 Technological benefits 技术优势 Manufactory in China 中国组装工厂 Heat Exchanger Market换热器市场份额 ESE A L PHE  range Alfa Laval Heat ExchangersAlfa Laval 换热器 “ESE heat exchangers” 卫生领域常用换热器 Gasketed 胶垫式 Single wall单板式 Double-wall焊接双板式 Gemini 非焊接双板式 Semi-welded半焊式 Tubular管式 Shell Tube列管式 Tube-in-Tube管套管式 Brazed钎焊式 Copper Brazed铜焊式 Fusion Bonded熔焊式 “Alfa Laval Other Heat Exchangers” 其他类型的换热器 Spiral Compablock ConthermAlfaRex AlfaVap AlfaCond (Air products) Alfa Laval’s Historical Base Alfa Laval 公司发展历程 PHE – main components板式换热器主要组成部分和功能 PHE - flow principle板式换热器:交换原理 Plate - corrugation function板片:波纹的作用 Mechanical 机械方面 Provide support points 形成支撑点 Allows thin material 提高强度, 使板片更薄 Heat Transferred in a HE板式换热器的热交换原理 The temperature profile at one point of the plate wall 板片壁面上任一点的温度剖面图 Plate - corrugation and channels板片: 波纹和通道 Plate - parallel flow板片:平行流 Plate - parallel flow板片:平行流 Parallel flow advantages平行流的优点 One plate one gasket只须一种板片和胶垫 Identical plates in the plate pack 用同样的板片组成整套板片组 Rotated 180o to achieve both sides转动180度就可以是下一张板片 Less spares required更小的维修保养空间 Fully supported diagonal板片之间更好地支撑 Higher design pressure or thinner plate material可以达到更高的设计压力和使用更薄的板片 No crossing of nozzles板孔不会磨损 Plate - distribution area板片:分流区 Chocolate pattern 巧克力壮分流区 Distributes flow evenly over the plate 均匀地分配流体 Plate – materials板片－材料 Standard materials and thicknesses 标准材料及厚度 AISI 304 (stainless steel) 304不锈钢 Usually 0.4 or 0.5 mm thickness 通常厚度为0.4或0.5mm Cheapest possible solution 最为便宜 AISI 316 (stainless steel) 316不锈钢 Always 0.5 and 0.6 mm 通常厚度为0.5或0.6mm Some with thicker plates (high-pressure applications) 高压工况时厚度较厚 254 SMO (high-alloy stainless steel) 合金SMO 254 Usually in 0.6 mm to allow stock-keeping 通常库存都是0.6mm厚度 Titanium 钛板 Always 0.5 and 0.6 mm 通常是0.5或0.6mm Some with thicker p