花键磨床说明书.docVIP

长春大学光华学院 毕业设计（论文）专用纸 PAGE 第 PAGE 1 页 共 NUMPAGES 43 页 中文摘要 组合机床是以通用部件为基础，配以按工件特定形状和加工工艺设计的专用部件和夹具，组成的半自动或自动专用机床。组合机床一般采用多轴、多刀、多工序、多面或多工位同时加工的方式，生产效率比通用机床高几倍至几十倍。由于通用部件已经标准化和系列化，可根据需要灵活配置，能缩短设计和制造周期。为了提高生产效率，满足加工要求，本课题设计了连杆螺栓孔钻扩铰组合机床。根据被加工零件确定加工孔的数量、位置和切削用量，进行组合机床的总体的设计：拟订了组合机床的总体方案，应用最优化方法选择刀具，接杆，进行中间底座等相关辅助件的尺寸计算。根据要加工的孔零件尺寸进行组合机床通用多轴箱的设计：绘制主轴箱原始依据图，确定主轴和齿轮模数，确定出传动系统，计算出主轴和传动轴的坐标。通过以上设计，实现了连杆螺栓孔的加工，较好的达到了设计要求。 [关键词] 组合机床 钻床 主轴箱 英文摘要 Combination Machine is based on common components, supported by the workpiece specific shape and design of dedicated processing technology and fixture parts, components for the semi-automatic or automatic machine. The general composition of multi-axis machine tools, multi-tool,multi-process,multi-faceted or more workers in the processing at the same time, production of high-efficient than GM machine several times to 10 times. As GM has standardized components and series, based on the need for flexible configuration, can shorten the design and manufacturing cycle. In order to improve production efficiency to meet the processing requirements, this topic was designed link bolt hole drilling machine combination of expansion joints. According to be processed-processing components determine the number, location and amount of cutting, a combination of the overall design machine: the machine developed a combination of the overall plan, the choice of optimization tools, then-, intermediate support base, and other related pieces of the size Calculated. According to the processing of the hole combination of machine tool parts size of the common multi-axle box design: Drawing Headstock based on the original plans, identify spindle and gear module, identified transmission system, calculate the coordinates of the spindle and drive shaft. Through the above design, to achieve a link bolt hole of the processing, and better meet the design requirements. [keyword] Combination Machine riller adstock 目录 TOC \o 1-