spatio-temporal human grip force analysis via sensor arrays通过传感器阵列时空人类控制受力分析.pdfVIP

Sensors 2009, 9, 6330-6345; doi:10.3390/ OPEN ACCESS sensors ISSN 1424-8220 /journal/sensors Article Spatio-Temporal Human Grip Force Analysis via Sensor Arrays Dieter F. Kutz 1,*, Alexander Wölfel 1, Tobias Meindl 1, Dagmar Timmann 2 and Florian P. Kolb 1 1 Department of Physiological Genomics, Institute of Physiology, University of Munich, Pettenkoferstr. 12, 80336 Munich, Germany; E-Mails: woelfela@ (A.W.); meindl.tobias@ (T.M.); f.kolb@lmu.de (F.P.K.) 2 Department of Neurology, University of Duisburg-Essen, Hufelandstr. 55, 45138 Essen, Germany; E-Mail: dagmar.timmann-braun@uni-duisburg-essen.de (D.T.) * Author to whom correspondence should be addressed; E-Mail: kutz@lmu.de; Tel.: +49-89-218075230; Fax: +49-89-218075216 Received: 1 July 2009; in revised form: 6 August 2009 / Accepted: 7 August 2009 / Published: 12 August 2009 Abstract: This study describes a technique for measuring human grip forces exerted on a cylindrical object via a sensor array. Standardised resistor-based pressure sensor arrays for industrial and medical applications have been available for some time. We used a special 20 mm diameter grip rod that subjects could either move actively with their fingers in the horizontal direction or exert reactive forces against opposing forces generated in the rod by a linear motor. The sensor array film was attached to the rod by adhesive tape and covered 2 2 approximately 45 cm of the rod surface. The sensor de