高分子板（Polymer board）.docVIP

高分子板（Polymer board） Macromolecule insulating board is used for insulation of foundation and trench cover of electrolyzer. Polymer insulation products, also known as electrical asbestos cement pressure plate, to chrysotile asbestos and cement as the basic raw materials, the use of round net copy, law machine, copy plate also, cutting and oil pressure and other processes made. The utility model can be used as a separator for an electric appliance and a part of an electric appliance for high temperature arc action, and the plate is impregnated by processing and insulating paint, and can be used as an electrical insulating material for making an electric appliance switch bottom board. It can also be used in high temperature places. The board has the advantages of firm, high strength, corrosion resistance, frost resistance, heat resistance, insulation, fire protection and so on. Note: the polymer insulation products, must be dry and soaked in strict accordance with the requirements, or not can be used as electrical insulation materials, insulation requirements are too high, use a dry, but care must be taken to control the rise speed of the smell. If the polymer insulation products are damp, it will cause insufficient insulation resistance to the ground, but only when the product is required to be issued in the dry state. GB/T 2988-2004, LZ-75 Clay brick is one of the main varieties of silicon aluminum series products. It is made of clay clinker as aggregate, refractory clay as binder, and refractory products with Al2O3 content of 30-48%. Mainly used in heat boilers, glass furnaces, cement kilns, chemical fertilizer gas furnace, blast furnace, hot blast furnace, coking furnace, electric furnace, casting and pouring steel bricks. I. General fireclay refractory products 1, products according to the indicators are divided into (NZ), -42, (NZ) -40, (NZ) -38 three grades. 2. The shape and size of the products conform to the requirements of GB2992-82 general shape and size of r