魔方玩法（Rubiks Cube）.docVIP

魔方玩法（Rubiks Cube） The first step is the cross of the bottom The white center block is used as the bottom layer, and the upper layer is searched for the white edge block (the upper middle block on the edge) If the white is up and the top is rotated, the side color is aligned with the color of a center block on the side and aligns the alignment to itself Rotate the front (facing the nearest side) 180 degrees so that the white reaches the bottom If the edges are white to the sides, and keep the bottom unchanged, rotate the cube as a whole so that the white faces towards itself The front (from the nearest face) is 90 degrees, and the right is 90 degrees, making the white up, Rotate the top layer so that another color of the white edge is aligned with the color of the center block on the side Rotate the aligned side by 180 degrees so that the white reaches the bottom. The second step homing corner To find 4 corner blocks, it must be a block with white surface First look for the first layer of white corner blocks and look at the other two colors of the corner block Rotate the top layer so that the corner block is located at the top angle between the two other colors except white The overall rotating cube keeps the bottom surface unchanged, so that the corner blocks found are located in the upper right corner (1) white to the right, 90 degrees to the right, 90 degrees to the right, 90 degrees to the right (2) white to oneself, the front inverse 90 degrees, the inverse 90 degrees, the front 90 degrees (3) white upward, do two times (1), white is right, and then do it again (1) can Results: the bottom face is back and the four sides are inverted T Third step alignment Observe the upper layer and look for the edges without the yellow face Rotate the upper layer so that the side color of the edge of the block to be restored is aligned with the color of the center block of one side See the upper color of the edge block at this time, (1) if the center block of the side with the