XGN2-10箱型固定式开关柜英文说明书.docVIP

XGN2-10 box stationary metal sealing switchgear Overview 1.1 XGN2-10 box stationary metal sealing switch equipment (referred to as the switchgear) is suitable for 12KV and below three-phase AC 50HZ system as acceptance and distribution of electric energy use, particularly suitable for frequent operation places, the bus system is a single bus , and derive a single bus bar with bypass and double-bus structure.1.2 XGN2-10 box stationary AC metal sealing switch equipment, on the basis of ordinary type of switchgear has been derived use for high-altitude plateau-type products.1.3 This switchgear meet the national standard GB3906 3 ~ 35KV AC Metal Sealing Switchgear and international requirements of standard IEC298, and has Five Anti lockout feature. 1.4 Main switch of this switchgear is using ZN28A-10 series vacuum circuit breaker and SN10-10 type small oil circuit breaker with series with CD10 and CD17 series of electromagnetic and CT8 series and CT17/CT19 series spring mechanism. According to user needs can also be used ZN28-10, ZN73 etc integral circuit breakers, disconnector using GN30-10 rotary isolation switch, GN22-10 high-current disconnectors and GN30-10 rotary-high current isolation switch products. Use environmental conditions: 2.1Environmental temperature: upper limit + 40℃; lower limit -5 ℃ 2.2 Altitude does not exceed 1000m, which of plateau-type switchgear does not exceed 3000m 2.3 Relative humidity: daily average is no greater than 95%, monthly average is not more than 90% 2.4 Vapor pressure: daily average is more than 2.2 × 10-3Mpa, monthly average less than 1.8 × 10-3Mpa; 2.5 Seismic intensity: no more than 8 degrees 2.6 No fire and explosion danger, serious pollution, chemical corrosion and violent vibration places. 3. Product series and main specification, technical data 3.1 Main wiring scheme specifications refer to Table 1, main wiring scheme assembly example refer to Table 2. 3.2 When used at plateau-type scheme, the components shown at Table 1