电路板生产流程（Circuit board production process）.docVIP

电路板生产流程（Circuit board production process） This article is contributed by vyh2000 DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Zhaoqing Yifeng Chemical Industrial Co. Ltd. TEL: (0758) 2875733 FAX: (0758) 2875033 1.1. Desmear process flow and program No.slot 91011 slot name swing KmnO4 recovery preneutralization washing water washing and double double leavening double washing material soaking time of 10 -15 10 -30 1 -2 -2 1 2 -4 -4 2 4 -8 -5 3 2 -4 drop 10 -20 5 step program crane 10 -20, 10 -20 1.2. PTH process flow and program No. 910111213142627 slot 28 slot hole whole hot water double washing microetch double washing acid leaching double washing pre activation of two speed double dip washing water washing of copper copper double dip copper washing acid soaking time of 4 -6 -2 1 2 -4 -2 1 1 -2 1 -2 1 -2 -2 1 4 -6 -4 2 3 -5 -4 2 12 -18 -18 12 2 -4 -2 1 20 -80 drop time 10-20 crane step program 5 10-15, 10-20, 5, 10, 10, 5, 10 One Zhaoqing Yifeng Chemical Industrial Co. Ltd. 2. parameter management table DES/PTH/ I Cu parameter management table Groove name (3500L) processing time 4 - 8min, item bulking agent Mn, removing adhesive slag 10 - 15min (5800L) Mn 7+ TEL: (0758) 2875733 FAX: (0758) 2875033 Control range Control value Temperature control 65- + 3 DEG C Analysis frequency Production supplement Two For slot cycle of 170000 square meters Two Remark: more than 3 turns, more than 3 turns, and air agitation 350-450ml/l 400ml/l 50 - 60g/l = 25g/l 40 - 50g/l 1-2.5% 1-2.5% 0.28-0.31N 1.8-2.2N 0.17-0.25N = 1.26 80-120 g/l 2-6% 1.136-1.150 0.2-0.4N 1.150-1.164 0.26-0.46N 2-6 25g/l g/l 2.5-3.5% 8-12 g/l 0.9-1.1% 1.8-2.2g/l 4-8 g/l 6-12g/l 8-12% 60-80g/L 180-220g/L 40-80ppm = 8 2-5ml/L 10% g/L 70 200g/L 60ppm 3ml/L 1.143 0.3N 1.157 0.36N in thickness and 4 g/l 3% 10 g/l 1% 2g/l 6 g/l 9g/l 2% 0.3N 2.0N 2% 0.21N 100 g/l 4% 45g/l 55g/l 1 times / shift