监控知识（Monitoring knowledge）.docVIP

监控知识（Monitoring knowledge） Monitoring knowledge -------------------------------------------------------------------------------- Construction level of road traffic monitoring system I. brief overview concept The road traffic security access monitoring system (hereinafter referred to as: Bayonet system) is based on specific places such as road toll stations, traffic orsecurity checkpoints bayonet point, for all the shooting, a road traffic monitoring system for recording and processing of motor vehicles through the bayonet point. The bayonet system is usually composed of motor vehicle induction, vehicle shooting, image recording, image processing and information management, auxiliary light source and auxiliary support. Depending on the way components are used, the bayonet system usually has the following types. 1. Vehicle induction mode: induction coil; video; ultrasonic or microwave; infrared ray. 2, vehicle shooting methods: continuous shooting; intermittent capture. 3, image recording mode: analog mode: A, ordinary video recorder (VCR), B, long effect video recorder (LVR). Digital mode: A, hard disk video recorder (HDR); B, CD burner (CDR, DVDR); C and digital video recorder (DVR). 4, image processing and information management methods: video recording and retrieval; image digitization and database management; digital image fuzzy recognition and database management. 5, auxiliary light source type: strobe lighting, such as flash; continuous lighting, such as street lamps and other cold and hot light source. 6, auxiliary support type: 1. Longmen frame; cantilever frame such as L or F type. The bayonet system not only can be used to monitor traffic conditions such as traffic flow, speed and degree of patency, but also by the analysis of the motor vehicle recording and other traffic information processing such as automatic recognition and processing and vehicle license plate information, realize the traffic violation, and the suspect vehicle accident investigation con