支架多工位级进模（TopSolid’Progress）毕业设计论文.doc

支架多工位级进模（TopSolid’Progress） 设计 工 学 部 工学二部 专 业 班 级 学 号 姓 名 指导教师 负责教师 沈阳航空工业学院2010年6月摘 要 经过对零件进行仔细的工艺分析，最终确定此套模具采用多工位，此套模具工序复杂，具有冲孔，弯曲，成型等多个工序，难点在于多处弯曲，一处对称弯曲，一处Z型弯曲。为防止弯曲后回弹，故在Z型弯曲后采用校正工序。 采用多工位级进模不但大大提高生产效率，而且同时避免了多套模具冲裁时多次定位造成的误差，进而提高了零件的精度。操作起来十分方便，而且大大减少了多个单工序模带来的材料损耗。使用使得模具的结构更加立体，显而易见。此套模具为人工手动送料安装了导料钉，并且为了提高精度准却定位在每步工位上安装了多个导正销进行定位。此套模具采用弹性卸料方式，以及浮料装置。此套模具的设计利用法国Missler 公司开发的三维软件，通过该软件进行对模具的三维实体的设计，再将实体转化为二维图纸，最后再把图纸转入到CAD软件中进行编辑修改。由于需要以上软件对工件进行设计，因此需要对以上软件进行了解与掌握。 该软件功能强大操作简单方便，在设计中使得模具的结构更加立体，显而易见。 关键词：；；TopSolid’Progress；Abstract Through the process of spare parts, carefully finally determined by the mold multi-position pressure, this set of mould process complex, punching, bending, molding multi-process.it is difficult, in a symmetric curved, bending, a Z bending. To prevent bent, after springback using bend in the Z after correction. Using multi-position progressive not only greatly improve the production efficiency, but also avoid the mold cutting position when the error caused by many times, and improve the precision of parts. It is convenient, and operating more than a single procedure greatly reduce the material loss modulus. Using three-dimensional structure of mould makes more, obvious. This set of mould for manually feed installation guide material, and in order to improve the precision positioning in each step but must install a cubicle than guide pin location. This set of mould using elastic and unloading float device. This set of mold design and use of Missler French company development TopSolid safely through the 3d software, software for mould design, three-dimensional entity 2d drawings will be converted into the drawing, and finally to edit changes in CAD software. Due to the need for the software design, and therefore need for more understanding and mastering software. This powerful tool for easy operation, in the design of die structure more stereo, obviously. Keywords: progressive die design;Z bending; T