计算机组装（Computer assembly）.docVIP

计算机组装（Computer assembly） Computer assembly and maintenance test questions (two) Name: student number: class: (1) the correctness of the SOCKET (socket) statement: A is made up of IP address, +TCP or UDP port B for identifying applications C consists of the host name +TCP or the UDP port D and different applications can use the same port (2) stands for () addresses A, host address B, network address C multicast address D, broadcast address (3) the distance between two Ethernet switches is 600 meters. What cable do you choose to connect to two switches? A, twisted pair B, coaxial cable C, fiber (4) the TCP protocol distinguishes between different programs through () A and IP addresses B and port number C, IP address + port number D, the above answers are wrong (5) by default, when the destination of the message received by the router is 55, the strategy adopted is to select the most accurate answer (IP) A, discard B, radio C, forwarding D, the above answers are wrong (6) if the two computer is to be connected directly through a twisted pair, the correct line sequence is () A, 1--1, 2--2, 3--3, 4--4, 5--5, 6--6, 7--7, 8--8 B, 1--2, 2--1, 3--6, 4--4, 5--5, 6--3, 7--7, 8--8 C, 1--3, 2--6, 3--1, 4--4, 5--5, 6--2, 7--7, 8--8 The D and two computers cannot be connected directly through twisted wires (7) a C class network is divided into 3 subnets, each subnet hosts at least 55 hosts, and the subnet mask used is: A, 48, B, 40 C, 24, D, 92 (8) using variable length subnet mask technology can put large network into smaller sub networks, such as target mask network is divided into two sub networks, assuming the first subnet is / 17, second) (sub network A, / 17, B, / 17 C, , D, / 17 (9) FDDI uses () LAN technology A, Ethernet, B, fast ethernet; C, token ring, D, token bus. (10) when a host moves from one network to another, the following statement is correct () (select the most accurate answer) A must change its IP address and MAC address B must change its IP address wit