酒店网络故障处理（Hotel network troubleshooting）.doc

酒店网络故障处理（Hotel network troubleshooting） LAN computer is connected to the switch device, and the device through the exchange and processing data, it can be said that the switch work condition quality will directly affect the overall performance of LAN network. In general, the new equipment put into use switch performance are often relatively stable, but rarely will malfunction; with the working time prolonging, and the changing of network application, the probability of failure of the switch is also gradually increasing. In order to improve the exchange efficiency of solving failure problems, ensure the network can always run efficiently, this paper is from the perspective of the actual, to exchange three common faults reduction interpretation, I hope we can get some inspiration! 1. buffer overflow failures A total of two ordinary unit LAN switch, each switch is connected to the CISCO router equipment units through hundreds of twisted pair, and through the Internet network access equipment. Usually each switch is connected with about 10 computers, each computer can successfully access the Internet through the switch; recently do not know how, some units in LAN computer can be normal, some computer but not online. At first, the network administrator thought is the computers own factors, however, check on the computer system of Internet settings and network viruses, found that there is no problem, use the ping command to test the local IP address is normal, but in the gateway address Ping LAN, that is not normal, it seems that the computer fault some problems exist in the line switch. Will it be the connectivity of the physical circuit? With this in mind, the network administrator immediately tested the twisted pair connectivity of the computer and the switch using a network tester, and found that their connectivity was normal. The exclusion of computer network lines and self factors, the network administrator to check the switch working state is normal; when he came t