预充（Pre charge）.docVIP

预充（Pre charge） In 1, the domestic water injection packing: currently used for water injection for clinical use of packaging are almost required to use ampoule packaging, cut glass ampoule neck, then inhale a sterile syringe and injected the patient with the infusion bottle or join the intravenous drip, intramuscular injection etc.. 2, the domestic status of powder packing: packing injection, freeze-dried powder injection ampoules are invariably solvent solute to packaging, bottle or bottle packaging, use must go through five procedures: a solvent bottle ampoule packaging, cut (or crack), then the suction of the medicine liquid in the neck a sterile syringe, syringe needle punctured the solute bottle stopper, into which the mixing solvent to solute the bottle of water and powder to solute from the bottle again will mix the liquid suction sterile syringe to puncture the liquid infusion bottle for intravenous or intramuscular and intravenous injection. 1, the use of foreign water injection: The ampoule packing water injection has been basically not used in developed countries, and most of them are packed in penicillin bottles. The advantage is that the ampoule neck can be cut without using the glass crumbs to enter the liquid medicine and puncture the fingers of the operator. In recent years, pre injection syringes filled with pre packed cartridge syringes represented by prophylactic vaccines have been imported into china. This package is a liquid pre loaded glass syringes, sealing rubber sleeve using disposable needle with its own inserted in front of aseptic packaging, the use of direct injection, mainly for high-end drugs. Because of its convenient and quick use, no pollution, good treatment quality and many other advantages, it has been favored by many manufacturers. Only the price is too high and the promotion is affected. At the same time, the fatal defect of the foreign cartridge syringe is that the contaminated liquid can not be solved because the liquid is imm