扬州大学土木工程 毕业设计计算书.doc

扬州大学 YANGZHOU UNIVERSITY 课题名称 扬州文峰街道办综合业务楼设计（方案一） 副标题 学院 广陵学院 专 业(系) 土木工程（建筑） 姓名 X X X 学号 080008xxx 指导教师 ccc 日期 2012年5月28日  扬州文峰街道办综合业务楼 学 生 (专业: 土木工程)指导教师 (单位: 学院土木工程系) 毕业设计题目是扬州结构设计，该楼的总建筑面积大约是平方米，共5层，建筑高度为0米。本建筑采用钢筋混凝土全现浇框架结构体系。本设计内容包括手算和电算两部分。其中手算部分的主要内容为设计的总说明、构件尺寸的初步确定、荷载、框架在水平及竖向荷载作用下的内力分析、内力组合、基础设计。）此框架属于三级框架，进行节点抗震设计，但是在梁柱截面设计时要采用“强柱弱梁”原则。电算时，用PMCAD软件进行结构平面布置，输入荷载数据，用AT-8软件进行。 建筑设计，结构设计，框架结构。 Guangling College, Yangzhou University WenFeng neighborhood integrated Business Building Author xxx (Major: Civil Engineering) Supervisor xxx (Department: Building Engineering) Abstract My graduation topic is Yangzhou WenFeng neighborhood integrated business building, the Business building is a total construction area of ??approximately 4406 square meters, whose height is 20.150 meters,five floors ,full-cast reinforced concrete frame structure. The design includes hand-counted and computer-counted. Hand-counted contents the general description , the determination of member size, load derivation, internal force of the framework in the horizontal and vertical loads , internal force of beams and columns, beam and column reinforcement, the basis design, stair design, plate calculation. The project earthquake intensity is 7 degrees(0.15g), without considering the vertical earthquake. First I use the bottom of the seismic shear method and D value method under earthquake actions .Then I completed a horizontal Pin Frame Structure calculations. Moment distribution method was used to complete the dead load and live load covered under the internal force calculation. This framework is three-level framework, without seismic resistant design. During the beam and column design,it must meet a strong column and weak beam principle.Computer-counted, first use PMCAD software to layout and input load data, and then use the SAT-8 spreadsheet software. After spreadsheet, I use PKPM to draw graphics, including basic, columns, beams, plates, KJ-5 and LT1. 【Key Wo