习题2（Problem 2）.docVIP

习题2（Problem 2） Two questions (25 points): please describe _ tank for pressure test before operation. Taking vertical vault tank as the reference, the preparation, pre filling inspection, pressure test operation, pressure test, abnormal treatment of pressure test and inspection of tools are explained. Standard answer: Step 1: preparation (3 points) 1, wear good helmets, gloves, shoes, overalls and other labor protection products; (1 points) 2, with good F wrench, adjustable wrench, fire hose, level instrument and other labor tools; (1 points) 3, a clear test pressure source of water; (1 points) The second step: check before water filling (5 points) 1, tank sealing inspection: check tank valve closure and tank accessories sealing situation; (2 points) 2, tank connection pipeline inspection: check and tank connection pipeline has been disconnected; (2 points) 3, check whether the temperature is lower than 5 degrees; (1 points) The third step: pressure test operation (7 points) 1, water filling height: (2 points) Observe the observation of water filling height (1 points); Fill the water to the highest operating level of the design; (1 points) 2, stay stable time: (2 points) The water filling time is consistent with the requirement; (2 points) 3, positive and negative pressure test (3 points) During tank top positive and negative pressure test, check the liquid level of liquid level gauge; (1 points) Control the water release rate when making tank negative pressure test; (1 points) Open the pervious aperture at the end of the tank positive and negative pressure test; (1 points) Fourth step: check the pressure test process (4 points) 1 、 weld inspection; (1 points) 2, attachment seal inspection; (1 points) 3, settlement check; (1 points) 4, tank deformation inspection; (1 points) The fourth step: abnormal pressure test treatment (4 points) 1, water leakage during the process, immediately stop filling water; (2 points) 2, the basis of uneven settlement or settlement of exc