定时开机（Resume By Alarm）.docVIP

定时开机（Resume By Alarm） Through the CMOS settings to achieve timing start set as follows: the first to enter the CMOS SETUP program (most of the motherboard is when the computer is started; and then press the DEL key to enter) will light moved to the Power Management Setup option, enter the menu; then the Resume by Alarm is set to Enabled and in the Date (of Month) Alarm item set monthly start date (0 day, 1 per month to 1, 2 represents 2 per month, ) set the boot time in the Time (hh:mm:ss) Alarm; finally save the settings and restart; when you turn off the computer, your computer will start automatically at the time you specify. Note: 1. computer motherboard must have Resume by Alarm function to achieve the start time; 2. to achieve timing boot, Password boot must cancel the function; 3. the key point is to connect the host power supply. Timing shutdown can be implemented using software As long as your system is XP, you can implement it without any software Start run run enter shutdown + parameter The -i display GUI interface must be the first option -l logout (cannot be used with option -m) -s closes this computer -r shutdown to start this computer -a abandon system shutdown -m \computername remote computer shutdown / restart / abandon -t XX setting off timeout is XX seconds -c comment closes the comment (max 127 characters) -f forced the application to shut down without warning -d [u][p]: xx:yy shutdown reason code U is user code P is a planned shutdown code XX is a major cause of code (less than 256 of positive integers) YY is a secondary cause code (less than 65536 of the positive integer) -f: force to close the application -m \ computer name: control remote computer -i: displays the graphical user interface, but must be the first option for Shutdown -l: write off the current user -r: power off and restart -t time: set the shutdown countdown -c message content: enter the message contents in the shutdown dialog box (no more than 127 characters) 2, for example: Sh