查新项目的科学技术要点,查新点填写案例（Check the scientific and technological points of the new project and fill in the case with new points）.docVIP

查新项目的科学技术要点,查新点填写案例（Check the scientific and technological points of the new project and fill in the case with new points） Check the scientific and technological points of the new project and fill in the case with new points Case 1 Name of the project: biocompatibility, ear cartilage, stent, rapid prototyping Novelty finding: identification of scientific and technological achievements The scientific and technological points of the novelty search project: Microtia is a congenital disease that has a serious impact on the patients physical and mental condition. The autogenous rib cartilage is cut into the shape of the ear cartilage scaffold to repair the deformity appearance, and the operation time is long. The operation doctor requires high engraving technique and causes additional injury to the patient. The outer ear repaired by this method is heavy and unsatisfactory. The use of imported artificial ear cartilage scaffolds is expensive and difficult to achieve and is symmetrical with healthy ears. This project uses the technology is: according to the CT data with the healthy side of the external ear, reverse, mirror and through appropriate correction, patients get ideal ear cartilage data; selection of biocompatible elastomeric materials, rapid forming integral scaffold. The elastic ear cartilage scaffold, not only to achieve a healthy and complete symmetrical side ear shape, shorten operation time, reduce the technical level of the surgeons requirements, but also reduce the cost of surgery, patients become a more acceptable ideal repair means, realize the real meaning of the customer to repair small ear deformity. Novelty screening: rapid prototyping of ear cartilage scaffolds with biocompatible elastic materials. Novelty search: find scientific and technical literature and patent reports about this subject both at home and abroad, and draw a comparative conclusion according to the retrieval results. Case 2 Name of the project: hot isostatic pressing sintering techn