橱柜板材介绍（Cabinet plate introduction）.docVIP

橱柜板材介绍（Cabinet plate introduction） Relatively crisp, bending resistance is poor, made of door panels are not smooth, easy to deformation! Paint cabinets also welcome, base paint door selection of MDF, after milling, grinding, primer and finish repeatedly spraying, grinding and polishing to the door, his bright colors, rich colors, easy to clean, and can do other and arc type, the quality difference is relatively large paint door the reason why this is the market difference is very large paint cabinets, the causes of the differences in quality of the paint door has several aspects, the quality of the one hand and paint, if the use of inferior paint, the color is not pure, but the smell, especially the process of bigger difference, need several spray paint, baking and grinding, ensure that the film thickness and film substrate adhesion and film smoothness and gloss, also some conditions are not met, or deliberately steal workers Reduce material to reduce costs, to do the quality is poor, because the paint needs dust-free paint room, poor condition, it may contain dust, impurities and so on. Identify the paint quality through the following measures: 1, through visual observation of the flatness of the film and cleanliness; 2, through the senses of smell, see is not a pungent smell; 3, can through the touch surface coating thickness, 4 feelings; if the conditions with and contrasting cases can do the destructive test, comparison and to observe the thickness of film adhesion. Plastic door is PVC film and density board by high temperature vacuum and has good waterproof performance, good abrasion resistance, and the color is very rich, but also can make the door shape beautiful, but stability is not too good, heating is not too close and the plastic cabinet. The quality of plastic cabinets, in addition to the impact of the base material, the quality of the relationship with the PVC film is relatively large, PVC films on the aging period is short, short service life, and al