喷丸1（Shot peening 1）.docVIP

喷丸1（Shot peening 1） Shot peening Open categories: industry, technology Catalog Shot peening overview What is the difference between shot blasting and sand blasting? Characteristics of shot peening Comparison of properties and effects of shot peening and shot blasting Nozzle in shot peening Assessment of shot peening quality Shot peening Shot peening, shot, penning. With shot peening for surface treatment, striking force, cleaning effect is obvious. But the shot peening on thin workpieces processing, easy to deformation of the workpiece, and the shot hit the surface of the workpiece (either shot or shot peening) to the metal substrate deformation, because Fe3O4 and Fe2O3 have no plastic, crushing and peeling, oil film and the substrate together with the deformation, so the workpiece with oil, shot blasting, shot peening is not completely clear oil. In the existing workpiece surface treatment method, the best cleaning effect is also blasting cleaning. Sand blasting is suitable for cleaning on the surface of workpiece. But at present our country commonly use sandblasting equipment, mostly by hinge dragon, scraper, bucket elevator and other primitive heavy sand transport machinery. The user needs to build a deep pit and waterproof layer construction machinery device, high cost, maintenance workload and maintenance cost greatly, a large number of silica dust generated during blasting can not be removed, the workers of environmental health and pollution seriously affected. Shot peening is a kind of surface strengthening technology widely used in factories. Its equipment is simple, cost is low, it is not limited by the shape and position of the workpiece, and it is easy to operate, but the working environment is poor. Shot peening is widely used to improve the mechanical strength, wear resistance, fatigue resistance and corrosion resistance of parts. It can also be used for surface extinction, removing oxide skin and eliminating residual stresses such as casting, forging a