ISO-IEC17025(英文版）adz.pdfVIP

VLAC-VR101 Fifth Edition General requirements for the Laboratory Accreditation (ISO/IEC17025 Version) Date of issue: December 19, 2002 Voluntary EMC Laboratory Accreditation Center, Inc. (VLAC) This document is copyrighted under the Copyright Act. Unauthorized reproduction, transcription, or any other unauthorized duplication of this document in whole or in part, with the exception of reproduction for private use, may constitute an infringement of the copyright and other rights 1 VLAC-VR101 Fifth Edition Contents Introduction 1. Scope 2. Normative references 3. Terms and definitions 4. Management requirements 5. Technical requirements Annex A: Cross-references between this guide and ISO 9001/2 Annex B: Guidelines for establishing applications for specific fields Bibliography 2 VLAC-VR101 Fifth Edition General requirements for the Laboratory Accreditation Introduction These general requirements (hereinafter referred to as this standard) set forth requirements applicable to quality control systems and test equipment that a testing laboratory must possess when applying for laboratory accreditation from the Voluntary EMC Laboratory Accreditation Center, Inc. (hereinafter referred to as this Center). These requirements are based on ISO/IEC 17025, “General requirements for the competence of calibration and testing laboratori