狭水道避让（Narrow channel avoidance）.docVIP

狭水道避让（Narrow channel avoidance） Discussion on the function of good ship art in crossing and avoiding of narrow channel ships Author: Zhan min Jian source: China water transport magazine date: 08 2011 03, click: 1015 In accordance with the general definition of navigable waterways, a channel less than 2 nautical miles is called a narrow channel. Therefore, in China, most waterways in port waters should belong to narrow waterways, and in accordance with the rules of international maritime collision avoidance, vessels in the port waters should avoid the provisions of narrow waterways. If there are other avoidance relations exist, but also distinguish between primary and secondary, successively, and in strict accordance with the rules and regulations for avoidance. What this article wants to discuss is: in the harbor water, the narrow channel or the fairway ships avoids in the ships to be easy to confuse the fuzzy question - intersection meets and traverses. At the same time, the author discusses the importance of using fine craft to help meet and avoid the crossing during the vessel avoidance operation. Relevant terms and contents Narrow channel clause: Marine regulation second, Section 1, rules of action for ships under any visibility, ninth: When the ninth first vessel travels along a narrow channel or fairway, it shall, as far as practicable, be close to the outer edge of the narrow channel or fairway at the starboard side of the vessel; The ninth fourth vessels shall not pass through narrow channels or channels, if such crossing will impede the passage of vessels that can only navigate safely within such waterways or waterways. The latter may use the acoustic code specified in paragraph fourth of thirty-fourth if he is suspicious of the intention of crossing the vessel; The second chapter of second ship sea gauge action rules in sight, Fifteenth cross terms: when two power driven vessels crossing has the risk of collision, he is in the boat on the starboard side of