玉的常识（Common sense of jade）.docVIP

玉的常识（Common sense of jade） How to distinguish between genuine and fake jade? The easy way is: First, look at the color. Color is the most important factor in assessing jade quality. The color reaches even, the Yang, the thick, the positive jade is the top grade. Uniform refers to the uniform; Yang refers to the bright color, give a person with cheerful, without a sense of stagnation; strong refers to the color is deep; it refers to no other variegated mix. Two is to look at the texture. Jade is a polycrystalline mineral formed by silicate at high temperature and high pressure. Its composition, crystal size, affects the smoothness, transparency, and tone of the material after being checked. Therefore, the finer the polycrystalline structure, the better the texture of jade. Three is to see transparency. Transparency is a physical phenomenon that is complementary to texture. The finer the texture, the higher the transparency. If the jade like transparent glass, the crystal fine makes the light going without stop. Four is to see the day after tomorrow processing. Jade was mined only and ore, must be made by experienced professional craftsmen in the colored part of the stone carefully cut out different shapes and accessories, polishing and carving, after polishing and waxing, to be sold on the market. In the process, without any bleaching, bleaching or dyeing, it is A grade, which is the highest value. Bleached and bleached is B grade, the value is next; the dyed C grade is of lower value. Excellent after processing, can add flowers to the jade brocade, double value. Five look at the cracks. Cracks on the jade may be caused during mining or processing. No matter what the color, texture, and transparency of a crack, it can affect its value. Sometimes cracks are not apparent on their surface, but they can be seen with a closer look in the sun. Cracks, especially bleached, bleached or dyed jade, are common. In the identification of jade quality, but also to prevent artifici