美的空调代码（Beautiful air conditioning code）.docVIP

美的空调代码（Beautiful air conditioning code） Beautiful air-conditioning fault code Daquan air-conditioning maintenance A cabinet. 1. applies to S series; K2 series; F2 series; H1 series Protect code representation content The time light is 5Hz to T1, and the room temperature sensor detects abnormal mouth The running light is 5Hz flashing, and the T2 evaporator sensor detects the abnormal mouth Defrosting lamp with 5Hz flashing T3 condenser sensor detects abnormal mouth Running, timing and defrosting lamps are protected by 5Hz flash outdoor unit simultaneously Note 1: when the outdoor unit protection and the temperature sensor detection abnormal occur simultaneously, priority shall be given to the outdoor unit to protect the fault. Note 2: outdoor protection occurs during forced cooling, and is cleared to a forced refrigeration condition after removal 2) for E series Guiji Protected code represents content, fault codes, and content P 02 compressor overload (reserved) E 01 temperature sensor open circuit short circuit fault P 03 indoor evaporator temperature is too low (refrigeration) E 02 compressor over flow (retention) P 04 room evaporator temperature is too high (heating) E 03 compressor under flow (first power check) (reserved) P 05 indoor outlet temperature is too high (heating) E 04 outdoor machine protection E 05 temperature sensor open circuit short circuit fault Note: during the fault, the LED flashes at 2Hz frequency while the LED is normal during protection 3) for S1 series; S2 series; S3 series; S6 series; Q series; R series; Q1 series; V series; Q2 series; U series; U1 series Guiji Protected code represents content, fault codes, and content P3 high and low voltage protection (frequency converter) E1 T1 sensor fault P4 indoor evaporator protects against compressor (high temperature or low temperature) E2 T2 sensor failure P5 outdoor condenser, high temperature protection, shutdown compressor, E3, T3 sensor, fault P7 outdoor exhaust temperature excessive shutdo