动火规定（Fire regulations）.docVIP

动火规定（Fire regulations） The first is to strengthen the China Huadian Corporation (hereinafter referred to as the group) for each unit of production safety management, specification for hot work, to avoid the occurrence of fire, ensure the safety of people and equipment, these Provisions are formulated. Second hot work adhere to the safety first, prevention first, combining prevention and suppression policy. Third said hot work as mentioned in these Provisions refers to operation of welding, cutting, grinding, and open fire into the fire. Fourth units in accordance with the provisions of hot work, also must strictly enforce the rules below the national and industry standards and related group company: Typical fire protection regulations for electric equipment (DL5027-93) Technical regulations for hydrogen safety (GB4962-85) Code of practice for electric power safety (electric parts and thermal and mechanical parts of power plants and substations), etc.. Article fifth these Provisions apply to all units of the group company. Regional branches, subsidiary companies, listed companies, hydropower company and power generation enterprises should according to the regulations, combined with their actual, formulate relevant management measures and implementation rules, step by step to record Corporation Safety department. Second key parts of chapter division and fire fire rating Sixth units should be in accordance with the fire risk, big losses, casualties, the impact of the big four big principle, according to the actual production, determine the production site fire prevention key parts. Seventh production site fire key parts should include: hydrogen tank area and control room, control room, communication room, computer room, fuel boiler and coal pulverizing system, turbine oil system, natural gas transportation system, hydrogen station, premises and transformer, cable and tunnel, battery room, flammable and explosive goods. Construction of a task unit, fire safety managemen