浅议外文翻译.docVIP

　　浅议外文翻译 浅议外文翻译_机械加工表面质量导读：detalsanizationloose,evenappearthecrackandsurfacelayermetalspeelingoff,makebeartoetalsproduceafterbesubjectedtohandovertoc 机械专业外语文献翻译 系 别 专 业 班 级 学生姓名 学 号 日 期 1 The Surface Quantity achine Processes A.the machine processes the surface quantity to use the influence of the function to the machine (A)The surface quantity to bear to ore small, it ore good.But rough degree of surface the value is too small, lubricant not easy storage, contact of the noodles easy occurrence the member glues to connect, ething to do stance of the spare parts, ent, ent in the early years, rough degree of surface the best value also enlargement. 2. The surface is cold to make to harden to bear to ake to harden to make rub the vice- surface layer the metals of shoinute details the degree of hardness exaltation, past can make bear to ake to harden the degree more high, bear to ore high, this is because excessively cold make to harden and etals anization loose, even appear the crack and surface layer metals peeling off, make bear to etals produce after be subjected to hand over to change to carry the lotus function usually takes place under the cold and hard layer of the spare parts surface and surfaces, therefore the surface quantity of the spare parts affects to the tired strength very greatly. 1. The surface influence of the rough degree upon the tired strength At hand over to change to carry the lotus function under, the surface part of the cave valley of the rough degree causes easily should the dint concentration, produce the tired crack.A value of surface is more big, the crackle of the surface is more deep, the crackle bottom radius is more small, the anti- tired breakage bottom ability is more bad. 2. Remaining dint, cold make to harden to the influence of the tired strength Remaining dint is very big to the spare parts influence of the tired strength.The surface layer remaining pull should the dint ake tired crack extend, accele