方案的选择和管网计算-wps.docVIP

摘要 本设计为安徽省某城市的给水工程设计，城市人口34万。设计的主要内容包括：取水工程设计、输配水工程设计和净水厂设计三大部分。 水源采用地表水，取水方式：岸边合建式取水构筑物取水。 净水厂处理水量为11.6万m3/d；净水工艺流程为：原水→取水泵站→管式静态混合器→网格絮凝池→斜管沉淀池→普通快滤池→液氯消毒→清水池→送水泵站→城市管网；根据原水水质及水温，絮凝剂选用聚合氯化铝，最高投药量为19.0mg/L，平均为 13.5mg/L；选液氯消毒剂，滤后加氯1.0mg/L；水厂绿化面积占水厂总面积的30%；出水水质符合《生活饮用水卫生标准》。 根据用户分布情况和水质要求，城市给水管网采用统一供水，管网水压、水质、水量均满足用户用水要求。 关键词：取水构筑物；网格絮凝池；斜管沉淀池；普通快滤池；统一供水。 Abstract With the population growth, economic development and the improving of living standards , human not only demands for more and more water, but also increases their demands on water quality . This design is about the water supply project for a city in the South area of China.The population of the area is 240,000. The design includes the project of Water diversion,water purification, Water diversion and Water distribution . According to the original information, the raw water comes from the surface water by the type of semi-underground-shore. The design-scale of the water purification plants is about 116,000 t/d. Process for the water purification: raw water →first pumping station → pipe rack static mixer→grid flocculation tank→inclined-tube settling tank→average rapid sand filter→clear well→secondary pumping station→Ripe line Network of city;According to the original water quality and the water temperature, selection of flocculant for polymeric aluminum chloride, the maximum dosage of 19.0 mg/L, with an average of 13.5mg/L; Chooses the liquid chlorine disinfectant, using 1.0mg/L after filtration chlorination;Waterworks total area of green plants total area of 30%; Waterworks water quality conforms to the standard of drinking water requirement. According to the distribution of users and the water quality, the water suppl networks for the city using the way of uniform water supply. According to the design results, all of the water pressure, water quality and water storage can meet the uses’demands. Keywords:Shore-water-structures;grid-flocculation-tank;inclined-tube settling tank;average rap