Ti-6Al-4V雷射与碱化表面处理之性质分析TheAnalysisof-YOKE.PDFVIP

Ti-6Al-4V 雷射與鹼化表面處理之性質分析 The Analysis of Properties on Ti-6Al-4V Surfaces by Laser and Alkali Treatment 劉浩文Hao-Wen Liu1 劉彥義Yen-Yi Liu2 洪廷甫Ting-Fu Hong1,2 * 1.國立屏東科技大學材料工程研究所 2.國立屏東科技大學車輛工程研究所 1.Graduate Institute of Materials Engineering, National Pingtung University of Science and Technology. 2.Department of Vehicle Engineering, National Pingtung University of Science and Technology. 連絡作者：tfhong@mail.npust.edu.tw 08-7703202#7558 摘要 本研究主要探討Nd:YAG 雷射與鹼化處理製程對 Ti-6Al-4V 試片表面性質之影響。實驗 結果顯示試片經雷射表面處理後，其表面產生形貌及成份微結構改變、可有效提升表面親水 性及硬度；若搭配鹼化處理(雷射鹼化) ，可在試片表面進一步生成微米級網狀結構，並可得 到更佳之親水性能表現。將試件浸泡於人工模擬體液(m-SBF)數天進行生物活性性能評估結果 顯示，未經任何處理之試片，浸泡第 14 天才於表面出現含鈣/磷元素之生成物；而經雷射表 面處理之試片，經 1 天浸泡後可在表面檢測到些許鈣/磷元素，其 EDS 峰值並隨浸泡天數增 加而提高；而經過兩階段處理之雷射鹼化試片，在浸泡第 3 天便可生成全面性覆蓋表面富含 鈣磷之類骨質層，顯示其優異的生物活性性能表現。 關鍵詞：Ti-6Al-4V,Nd ：YAG Laser,Surface Treatments,Bioactivity,SBF ABSTRACT This study investigated the effect of Nd: YAG laser and alkaline treatment process on the surface properties of Ti-6Al-4V. The results show that the Ti-6Al-4V surface after laser treatment, the surface morphology and micro-structure change, which can effectively improve the surface hydrophilicity and hardness ; if with alkali treatment (laser-alkali), available at the specimen surface is further generate micron mesh structure of get better hydrophilic performance. The specimen is soaked in simulated body fluid (m-SBF) the number of days for biological activity performance evaluation results show that without any processing of the Ti-6Al-4V, and the resultant calcium / phosphorus elements of the 14 day soaked genius appeared on the surface; but by laser treatment surface, after 1 day soaked can be detected on the surface calcium / phosphorus; and after laser-alkali of two-stage process, soaked 3 days can